Research Article
Habiba Shehu, Edidiong Okon
Abstract
Natural gas is an important fuel gas that can be used as a power generation fuel and as a basic raw material in petrochemical industries. Its composition varies extensively from one gas field to another. Despite this variation in the composition from source to source, the major component of natural gas is methane with inert gases and carbon dioxide. Hence, all natural gas must undergo some treatment with about 20% of total reserves requiring extensive treatment before transportation via pipelines. The question is can mesoporous membrane be highly selective for methane and be used for the treatment of natural gas? A methodology based on the use of dip-coated silica and zeolite membrane was developed. A single gas permeation test using a membrane reactor was carried out at a temperature of 293 K and a pressure range of 1 × 10-5 to 1 × 10-4 Pa. The permeance of CH4 was in the range of 1.15 × 10-6 to 2.88 × 10-6 mols-1m-2Pa-1 and a CH4/CO2 selectivity of 1.27 at 293 K and 0.09 MPa was obtained. The pore size of the membrane was evaluated using nitrogen adsorption and was found to be 2.09 nm. The results obtained have shown that it is possible to use a mesoporous membrane to selectively remove carbon dioxide from methane to produce pipeline quality natural gas. There is a need for further study of the transport mechanism of methane through the membrane since this is essential for the separation of other hydrocarbons that could be present as impurities.