Research Article
Prasad JS1, Obulesh YP,Babu
Abstract
Hard switching specifies the stressful switching behavior of the controlled switches. During the turn-off and turn-on processes, the power electronic device has to withstand high current and voltage simultaneously, resulting in high stress and switching losses. The switching loss is directly proportional to the switch frequency, thus reducing the maximum switch frequency of the power electronic converter. The concept was to incorporate resonant tanks in the converters to create oscillatory (usually sinusoidal) voltage and/or current waveforms, so the zero current switching (ZCS) or zero voltage switching (ZVS) conditions can be achieved for the power control switches. The Soft-switched power converters are generally utilizing the resonance condition. Resonance condition is generally occurred just during the turn-off and turn-on processes, so as to create ZCS and ZVS across each switch. The Regulated three and five multiple-output dc-dc converter under zero-voltage switching (ZVS) condition is proposed. The converter is consists of three outputs altogether. With the help of two asymmetric half bridge converters, the first and second outputs are controlled. Based on the phase shift between two asymmetric half bridge converters, the third output is controlled. At high switching frequency, these multiple-output dc–dc converters can give higher efficiency. The various stages of operation, soft switching condition and controlling schemes are also explained. A closed loop and open loop control techniques of the three multiple output converter is explained.